I-INCOLOY 825 (UNS N08825 / NS142)
Isicelo
I-alloy 825 iyingxubevange ye-nickel-iron-chromium ye-austenitic futhi echazwe ngokwengezwa kwe-molybdenum, ithusi ne-titanium. Yakhelwe ukunikeza ukumelana okuyingqayizivele ezindaweni eziningi ezigqwalayo, kokubili i-oxidizing kanye nokunciphisa.
I-alloy 825 yathuthukiswa ukuze inikeze ukumelana okuyingqayizivele ezindaweni eziningi ezigqwalayo, kokubili i-oxidizing kanye nokunciphisa. Ngebanga lokuqukethwe kwe-nickel eliphakathi kuka-38%–46%, leli banga libonisa ukumelana nokuqhekeka kwe-stress corrosion cracking (SCC) okudalwe ama-chloride nama-alkali. Okuqukethwe kwe-nickel kwanele ukumelana nokuqhekeka kwe-chloride-ion stress-corrosion. I-nickel, ngokuhlanganyela ne-molybdenum nethusi, iphinde inikeze ukumelana okuvelele ekunciphiseni izindawo ezifana nalezo eziqukethe i-sulfuric ne-phosphoric acid.
Okuqukethwe kwe-chromium ne-molybdenum nakho kunikeza ukumelana okuhle kwe-pitting kuzo zonke izindawo ngaphandle kwezixazululo ze-chloride ezixube kakhulu. Isetshenziswa njengento ephumelelayo ezindaweni ezihlukahlukene zenqubo, ingxubevange engu-825 igcina izakhiwo ezinhle zemishini kusukela emazingeni okushisa e-cryogenic afika ku-1,000 ° F.
Ukwengezwa kwe-titanium kuzinza i-Alloy 825 ngokumelene nokuzwela esimweni esishiselwe okwenza ingxubevange imelane nokuhlaselwa kwe-intergranular ngemva kokuchayeka emazingeni okushisa ebangeni obungakhuza izinsimbi ezingenasici ezingaqinile. Ukwenziwa kwe-Alloy 825 kufana nengxubevange ye-nickel-base, into ekwakheka kalula futhi ishiseleke ngamasu ahlukahlukene.
Le nto inokwakheka okuhle kakhulu, okujwayelekile kwama-alloys esisekelo se-nickel, okuvumela okokusebenza ukuthi kugotshwe kumarediya amancane kakhulu. Ukukhipha isisu ngemva kokugoba ngokuvamile akudingekile.
Ifana ne-alloy 800 kodwa ithuthukise ukumelana nokugqwala kwe-aqueous. Inokumelana okuhle kakhulu nakho kokubili ukunciphisa kanye ne-oxidizing acid, ukuqhekeka kwe-stress-corrosion, kanye nokuhlaselwa kwendawo okufana nokugqwala nokugqwala kwemifantu. Ingxubevange 825 imelana ikakhulukazi ne-sulfuric kanye ne-phosphoric acid. Le ngxubevange yensimbi ye-nickel isetshenziselwa ukucubungula amakhemikhali, izinto zokulawula ukungcoliswa komhlaba, amapayipi omthombo kawoyela negesi, ukucutshungulwa kabusha kukaphethiloli wenuzi, ukukhiqizwa kwe-asidi, kanye nemishini yokucosha.
Imininingwane Yomkhiqizo
ASTM B163, ASTM B423 , ASTM B704
Izidingo Chemical
I-alloy 825 (UNS N08825)
Ukwakhiwa %
| Ni I-Nickel | Cu Ithusi | Mo I-Molybdenum | Fe Insimbi | Mn IManganese | C Ikhabhoni | Si I-silicon | S Isibabule | Cr I-Chromium | Al I-Aluminium | Ti I-Titanium | |
| 38.0-46.0 | 1.5-3.0 | 2.5-3.5 | 22.0 imiz | 1.0 ubuningi | 0.05 ubuningi | 0.5 ubuningi | 0.03 ubuningi | 19.5-23.5 | 0.2 ubuningi | 0.6-1.2 | |
| Izakhiwo Zemishini | |
| Isivuno Amandla | 35 Ksi imiz |
| Amandla Okuqina | 85 Ksi imiz |
| Ubude(2" min) | 30% |
| Ukuqina(Isikali se-Rockwell B) | 90 HRB ubuningi |
Ukubekezelela Usayizi
| OD | I-OD Toleracne | Ukubekezelelana kwe-WT |
| Intshi | mm | % |
| 1/8" | +0.08/-0 | +/-10 |
| 1/4" | +/-0.10 | +/-10 |
| Kufika ku-1/2" | +/-0.13 | +/-15 |
| 1/2" kuya ku-1-1/2" , okungabaliwe | +/-0.13 | +/-10 |
| 1-1/2" kuya ku-3-1/2" , okungabaliwe | +/-0.25 | +/-10 |
| Qaphela: Ukubekezelelana kungaxoxisana ngakho ngokwezidingo eziqondile zekhasimende | ||
| Ingcindezi ephezulu evumelekile(iyunithi: IBHA) | ||||||||
| Ubukhulu Bodonga(mm) | ||||||||
| 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.96 | 4.78 | ||
| I-OD(mm) | 6.35 | 451 | 656 | 898 | 1161 | |||
| 9.53 | 290 | 416 | 573 | 754 | 1013 | |||
| 12.7 | 214 | 304 | 415 | 546 | 742 | |||
| 19.05 | 198 | 267 | 349 | 470 | ||||
| 25.4 | 147 | 197 | 256 | 343 | 509 | 630 | ||
| 31.8 | 116 | 156 | 202 | 269 | 396 | 488 | ||
| 38.1 | 129 | 167 | 222 | 325 | 399 | |||
| 50.8 | 96 | 124 | 164 | 239 | 292 | |||
Isitifiketi Sokuhlonishwa
I-ISO9001/2015 Standard
I-ISO 45001/2018 Standard
Isitifiketi se-PED
Isitifiketi sokuhlola ukuhambisana ne-Hydrogen ye-TUV
| Cha. | Usayizi(mm) | |
| OD | Thk | |
| BA Tube Inner surface roughness Ra0.35 | ||
| 1/4″ | 6.35 | 0.89 |
| 6.35 | 1.00 | |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 1/2” | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 3/4” | 19.05 | 1.65 |
| 1 | 25.40 | 1.65 |
| I-BA Tube I-Inner surface roughness Ra0.6 | ||
| 1/8″ | 3.175 | 0.71 |
| 1/4″ | 6.35 | 0.89 |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 9.53 | 3.18 | |
| 1/2″ | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 5/8″ | 15.88 | 1.24 |
| 15.88 | 1.65 | |
| 3/4″ | 19.05 | 1.24 |
| 19.05 | 1.65 | |
| 19.05 | 2.11 | |
| 1″ | 25.40 | 1.24 |
| 25.40 | 1.65 | |
| 25.40 | 2.11 | |
| 1-1/4″ | 31.75 | 1.65 |
| 1-1/2″ | 38.10 | 1.65 |
| 2″ | 50.80 | 1.65 |
| 10A | 17.30 | 1.20 |
| 15A | 21.70 | 1.65 |
| 20A | 27.20 | 1.65 |
| 25A | 34.00 | 1.65 |
| 32A | 42.70 | 1.65 |
| 40A | 48.60 | 1.65 |
| 50A | 60.50 | 1.65 |
| 8.00 | 1.00 | |
| 8.00 | 1.50 | |
| 10.00 | 1.00 | |
| 10.00 | 1.50 | |
| 10.00 | 2.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |
| 12.00 | 2.00 | |
| 14.00 | 1.00 | |
| 14.00 | 1.50 | |
| 14.00 | 2.00 | |
| 15.00 | 1.00 | |
| 15.00 | 1.50 | |
| 15.00 | 2.00 | |
| 16.00 | 1.00 | |
| 16.00 | 1.50 | |
| 16.00 | 2.00 | |
| 18.00 | 1.00 | |
| 18.00 | 1.50 | |
| 18.00 | 2.00 | |
| 19.00 | 1.50 | |
| 19.00 | 2.00 | |
| 20.00 | 1.50 | |
| 20.00 | 2.00 | |
| 22.00 | 1.50 | |
| 22.00 | 2.00 | |
| 25.00 | 2.00 | |
| 28.00 | 1.50 | |
| I-BA Tube, Asikho isicelo mayelana nobulukhuni bangaphakathi | ||
| 1/4″ | 6.35 | 0.89 |
| 6.35 | 1.24 | |
| 6.35 | 1.65 | |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 1/2″ | 12.70 | 0.89 |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 6.00 | 1.00 | |
| 8.00 | 1.00 | |
| 10.00 | 1.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |